The new safety Bunsen burner - ignites by sensor and requires no cables or gas pipes

The new UltraFire from Orange Scientific offers a free control without any physical contact over the totally independent unit. A simple movement of the hand or even of a test tube in front of the modern infra-red sensor will automatically ignite the flame. A rechargeable built-in battery offers electricity independence.

A single disposable gas cartridge is sufficient for the sterilisation of approximately 1500 inoculation loops. If needed, the UltraFire can also be connected directly to electricity and to a gas cylinder.

But however it is used, the innovative UltraFire provides optimal safety and ease of operation.

UltraFire switches itself off if:

• the flame is extinguished
• there is a power cut
• the maximum flame temperature is exceeded

In addition, an optical alarm warns for safety switch-off. Even if the instrument is connected to the mains, a voltage of only 7.2 V is used - a further safety aspect.

Ergonomically designed for ease of handling

UltraFire is compact and well-designed. The buttons for setting gas, air and operating time are easy to operate and the inclined keyboard is easy to clean. LEDs indicate the operating mode.

3 operational modes in one!

Sensor

Nothing could be simpler! In this operating mode, all you have to do is pass your hand max. 6-8 cm over the sensor and it will ignite automatically.

And it can be set to extinguish itself automatically 3 to 12 seconds after ignition.

Foot switch

Here, the flame is ignited and extinguished by a simple foot switch - hence enabling individual ignition times to be used keeping both hands free for other operations.

Continuous

In this mode, the flame is ignited by pressing a button and remains so until extinguished. A safety timer is incorporated that switches off the instrument if it is not used (settable from 10 to 60 minutes).

Technical Data